UCC4000-50GK-B26-8MOL
Артикул: 312898
Ultrasonic sensor
4 766 Р
Производитель:
PEPPERL+FUCHS
Поделиться:
Производитель: PEPPERL+FUCHS
noopener">Технические данные PDF
Краткое описание: технические характеристики UCC4000-50GK-B26-8MOL
| Описание оборудования | ||
|---|---|---|
| Single head system | ||
| General specifications | ||
|---|---|---|
| Sensing range | 250 ... 4000 mm | |
| Dead band | 0 ... 250 mm | |
| Standard target plate | 100 mm x 100 mm | |
| Transducer frequency | approx. 75 kHz | |
| Electrical specifications | ||
| Operating voltage | for UART and PWM operation: UUART/PWM = 2.5 ... 5 V DC, typical 3.3 V for LIN operation: ULIN = 8 ... 18 V DC, typical 12 V |
|
| No-load supply current | ≤ 60 mA at 3.3 V DC ≤ 20 mA at 12 V DC |
|
| Quiescent current indication | < 3 µA during standby mode at UART- and PWM operation | |
| Power consumption | ≤ 250 mW in the measurement operating mode | |
| Time delay before availability | ≤ 95 ms | |
| Interface 1 | ||
| Interface type | Physical LIN interface | |
| Transfer rate | 19.2 kBit/s (8N1) | |
| Cycle time | 80 ms | |
| Resolution | 16 mm (corresponding to 1 LSB) | |
| Interface 2 | ||
| Interface type | UART 3.3V | |
| Transfer rate | 19.2 kBit/s (8N1) | |
| Cycle time | 80 ms | |
| Resolution | 16 mm (corresponding to 1 LSB) | |
| Input | ||
| Input type | Standby active | |
| Signal level | low: 0 ... 0.8 V | |
| Output | ||
| Output type | PWM output (PNP) , not short-circuit protected | |
| Resolution | pulse length 10 µs /cm | |
| Output rated operating current | max. 10 mA | |
| Temperature influence | 3 % of full-scale value over the entire temperature range | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 60947-5-2:2007+A1:2012 : chapter 8.6.2.1, 8.6.2.2, 8.6.3 The sensor is designed to be supplied by a battery. The sensor signals are further processed in a control unit, which is also responsible fur EMC protection. |
|
| Ambient conditions | ||
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Mechanical specifications | ||
| Connection type | cable L = 276 mm ± 20 mm with Molex connector 70107-0007, 8-pin | |
| Degree of protection | IP66 / IP67 ( connector excluded ) | |
| Material | ||
| Housing | PBT | |
| Transducer | epoxy resin/hollow glass bead mixture; Polyurethane foam, PTFE coated | |
| Mass | 100 g | |
| Factory settings | ||
| Output | PWM output (PNP) Temperature compensation Address setting 7 |
|
| Beam width | wide | |
| General information | ||
| Scope of delivery | 2 nuts plastic | |
Оформить заказ на UCC4000-50GK-B26-8MOL вы можете в компании compeq-pepperl отправив заявку по почте, а также по телефону или в офисе компании.
Вам может понравиться
