IQT1-F61-IO-V1
Артикул: 299928
RFID Reader
19 863 Р
Производитель:
PEPPERL+FUCHS
Поделиться:
Производитель: PEPPERL+FUCHS
Краткое описание: технические характеристики IQT1-F61-IO-V1
| Описание оборудования | ||
|---|---|---|
| HF read/write station with IO-Link in accordance with ISO 15693 | ||
| General specifications | ||
|---|---|---|
| Operating frequency | 13.56 MHz | |
| Transfer rate | 26 kBit/s | |
| Sensing range | ||
| Read distance | 0 ... 55 mm | |
| Write distance | 0 ... 55 mm | |
| Width | max. 45 mm | |
| UL File Number | E87056 | |
| Functional safety related parameters | ||
| MTTFd | 280 a | |
| Mission Time (TM) | 10 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Indicators/operating means | ||
| LED green | Illuminated: power on Flashing: IO-Link communication |
|
| LED yellow | Data carrier detected | |
| LED red | Flashing: IO-Link communication interrupted | |
| LED blue | Write/read attempt is being performed | |
| Electrical specifications | ||
| Rated operating voltage | 20 ... 30 V DC , ripple 10 %SS | |
| Power consumption | ≤ 2 W | |
| Interface | ||
| Interface type | IO-Link | |
| Protocol | IO-Link V1.1 | |
| Cycle time | min. 4 ms | |
| Mode | COM 3 (230.4 kBaud) | |
| Process data width | 32 Byte | |
| SIO mode support | no | |
| Directive conformity | ||
| Radio equipment | ||
| Directive 2014/53/EU | EN 301489-1 EN 301489-3 EN 300330 EN 62368-1 EN 50364 |
|
| RoHS | ||
| Directive 2011/65/EU (RoHS) | EN 50581 | |
| Standard conformity | ||
| Degree of protection | EN 60529 | |
| Communication interface | EN 61131-9 | |
| RFID | ISO/IEC 15693-2 ISO/IEC 15693-3 ISO/IEC 18000-3 |
|
| Approvals and certificates | ||
| UL approval | cULus Listed, Class 2 Power Source, Type 1 enclosure | |
| FCC approval | This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. |
|
| IC approval | This device complies with Industry Canada licence-exempt RSS standard(s) and with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. |
|
| Radio approval | USA: FCC IREIQT1F61IO Canada: IC 7037A-IQT1F61IO |
|
| Ambient conditions | ||
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP67 | |
| Connection | connector M12 x 1 | |
| Material | ||
| Housing | PBT | |
| Encapsulation compound | WEVO 403FL/300 | |
| Installation | ||
| Distance between two heads | ≥ 150 mm |
|
| Mass | approx. 60 g | |
| Cable length | 20 cm | |
Оформить заказ на IQT1-F61-IO-V1 вы можете в компании compeq-pepperl отправив заявку по почте, а также по телефону или в офисе компании.
Вам может понравиться
