IC-KP-B12-V45 Auswer
Артикул: 125887
Control interface
132 196 Р
Производитель:
PEPPERL+FUCHS
Поделиться:
Производитель: PEPPERL+FUCHS
Краткое описание: технические характеристики IC-KP-B12-V45 Auswer
| Описание оборудования | ||
|---|---|---|
| Control interface unit IDENTControl with Ethernet interface |
||
| General specifications | ||
|---|---|---|
| Number of read/write heads | max. 4 alternative 2 read/write heads and 2 trigger sensors |
|
| UL File Number | E87056 | |
| Indicators/operating means | ||
| LEDs 1, 2, 3, 4 | Status indicator for read/write heads green: command at read/write head active yellow: approx. 1 second long, if command was successfully executed |
|
| LED PWR/ERR | green: power on red: Hardware fault |
|
| LED State | green: interface OK Off: Not ready for operation |
|
| LED Link/Act | green: network connection green flashing: bus active |
|
| LED Traffic | green: flashes in rhythm of sending/receiving data | |
| LED 100 MBit | yellow: transfer rate 100 Mbit/s Off: transfer rate 10 Mbit/s |
|
| LC display | two-line multi-function display with 12 characters per line configuration of the control interface and display of connected read/write heads as additional pictograms; easy and direct selection of operating commands and addressing |
|
| Button | 4 keys: ESC, up, down and return | |
| Electrical specifications | ||
| Rated operating voltage | 20 ... 30 V DC , PELV | |
| Ripple | ≤ 10 % at 30 V DC | |
| Current consumption | ≤ 2 A incl. read/write heads | |
| Power consumption | 3.5 W Without read/write heads | |
| Galvanic isolation | basic insulation acc. to DIN EN 50178, rated insulation voltage of 50 Veff | |
| Interface | ||
| Physical | Ethernet | |
| Protocol | SMTP HTTP TCP/IP (Port 10000) MODBUS/TCP EtherNet/IP PROFINET IO |
|
| Transfer rate | 10 MBit/s or 100 MBit/s | |
| Compliance with standards and directives | ||
| Standard conformity | ||
| Electromagnetic compatibility | EN 61326 | |
| Degree of protection | EN 60529 | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Storage temperature | -30 ... 80 °C (-22 ... 176 °F) | |
| Climatic conditions | air humidity max. 96 % Salt spray resistant to EN 60068-2-52 |
|
| Shock and impact resistance | Oscillation (Sine): 5 g, 10 - 1000 Hz to EN 60068-2-6 Shock (Half-sine): 30 g, 11 ms in accordance with EN 60068-2-27 |
|
| Mechanical specifications | ||
| Degree of protection | IP67 | |
| Connection | Read/write heads: shielded, 4-pin, M12 connector Power supply: M12 connector Protective earth: M6 earthing screw Ethernet: RJ-45 |
|
| Material | ||
| Housing | powder coated aluminum | |
| Installation | snap-on to 35 mm standard rail or screw fixing | |
| Mass | approx. 1000 g | |
Оформить заказ на IC-KP-B12-V45 Auswer вы можете в компании compeq-pepperl отправив заявку по почте, а также по телефону или в офисе компании.
Вам может понравиться
