NJ1,5-6,5-15-N-Y18009 x23GxxxD
Артикул: 180094
Inductive sensor
5 713 Р
Производитель:
PEPPERL+FUCHS
Поделиться:
Производитель: PEPPERL+FUCHS
Краткое описание: технические характеристики NJ1,5-6,5-15-N-Y18009 x23GxxxD
| General specifications | ||
|---|---|---|
| Switching function | Normally closed (NC) | |
| Output type | NAMUR | |
| Rated operating distance | 1.5 mm | |
| Installation | flush | |
| Assured operating distance | 0 ... 1.35 mm | |
| Reduction factor rAl | 0.22 | |
| Reduction factor rCu | 0.19 | |
| Reduction factor r304 | 0.65 | |
| Output type | 2-wire | |
| Nominal ratings | ||
| Nominal voltage | 8 V | |
| Switching frequency | 0 ... 5000 Hz | |
| Hysteresis | typ. 5% | |
| Suitable for 2:1 technology | yes , Reverse polarity protection diode not required | |
| Current consumption | ||
| Measuring plate not detected | ≥ 2.2 mA | |
| Measuring plate detected | ≤ 0.95 mA | |
| Compliance with standards and directives | ||
| Standard conformity | ||
| NAMUR | EN 60947-5-6:2000 IEC 60947-5-6:1999 |
|
| Standards | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 |
|
| Approvals and certificates | ||
| EAC conformity | TR CU 012/2011 | |
| UL approval | cULus Listed, General Purpose | |
| CSA approval | cCSAus Listed, General Purpose | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Mechanical specifications | ||
| Connection type | flexible leads PVC , 110 mm | |
| Core cross-section | 0.14 mm2 | |
| Housing material | Stainless steel 1.4305 / AISI 303 | |
| Sensing face | PBT | |
| Degree of protection | IP67 | |
| Equipment protection level Gb | ||
| CE marking | [*PD-Z02585A*] | |
| ATEX marking |  II 2G Ex ia IIC T6…T1 Gb The Ex-related marking can also be printed on the enclosed label. |
|
| Standards | EN 60079-0:2012+A11:2013, EN 60079-11:2012 Ignition protection "Intrinsic safety" Use is restricted to the following stated conditions |
|
| Appropriate type | NJ 1,5-6,5...-N... | |
| Effective internal capacitance | max. 30 nF ; a cable length of 10 m is considered. | |
| Effective internal inductance | max. 50 µH ; a cable length of 10 m is considered. | |
| Maximum permissible ambient temperature | Details of the correlation between the type of circuit connected, the maximum permissible ambient temperature, the temperature class, and the effective internal reactance values can be found on the EU-type examination certificate. | |
| Equipment protection level Gc (ic) | ||
| Certificate | PF 13 CERT 2895 X | |
| CE marking | [*PD-Z02586A*] | |
| ATEX marking | II 3G Ex ic IIC T6…T1 Gc The Ex-related marking can also be printed on the enclosed label. |
|
| Standards | EN 60079-0:2012+A11:2013, EN 60079-11:2012 Ignition protection category "ic" Use is restricted to the following stated conditions |
|
| Effective internal capacitance | max. 30 nF ; a cable length of 10 m is considered. | |
| Effective internal inductance | max. 50 µH ; A cable length of 10 m is considered. |
|
| Special conditions | ||
| for Pi=34 mW, Ii=25 mA, T6 | 70 °C (158 °F) | |
| for Pi=34 mW, Ii=25 mA, T5 | 85 °C (185 °F) | |
| for Pi=34 mW, Ii=25 mA, T4-T1 | 100 °C (212 °F) | |
| for Pi=64 mW, Ii=25 mA, T6 | 68 °C (154.4 °F) | |
| for Pi=64 mW, Ii=25 mA, T5 | 83 °C (181.4 °F) | |
| for Pi=64 mW, Ii=25 mA, T4-T1 | 100 °C (212 °F) | |
| for Pi=169 mW, Ii=52 mA, T6 | 49 °C (120.2 °F) | |
| for Pi=169 mW, Ii=52 mA, T5 | 64 °C (147.2 °F) | |
| for Pi=169 mW, Ii=52 mA, T4-T1 | 67 °C (152.6 °F) | |
| for Pi=242 mW, Ii=76 mA, T6 | 36 °C (96.8 °F) | |
| for Pi=242 mW, Ii=76 mA, T5 | 42 °C (107.6 °F) | |
| for Pi=242 mW, Ii=76 mA, T4-T1 | 42 °C (107.6 °F) | |
| Equipment protection level Da | ||
| CE marking | [*PD-Z02585A*] | |
| ATEX marking | II 1D Ex ia IIIC T135°C Da The Ex-related marking can also be printed on the enclosed label. |
|
| Standards | EN 60079-0:2012+A11:2013, EN 60079-11:2012 Ignition protection "Intrinsic safety" Use is restricted to the following stated conditions |
|
| Appropriate type | NJ 1,5-6,5...-N... | |
| Effective internal capacitance | max. 30 µF A cable length of 10 m is considered. |
|
| Effective internal inductance | max. 50 µH A cable length of 10 m is considered. |
|
| General information | ||
| Use in the hazardous area | see instruction manuals | |
| Category | 2G; 3G | |
Оформить заказ на NJ1,5-6,5-15-N-Y18009 x23GxxxD вы можете в компании compeq-pepperl отправив заявку по почте, а также по телефону или в офисе компании.
Вам может понравиться
