NJ60-FP-A2-P1-Y237070

Артикул: 237070

Inductive sensor

51 754 Р

Заказать

Производитель:

PEPPERL+FUCHS

Получить консультацию

Производитель: PEPPERL+FUCHS

Технические данные PDF

Краткое описание: технические характеристики NJ60-FP-A2-P1-Y237070

General specifications
Switching function		complementary
Output type		PNP
Rated operating distance		60 mm
Installation		non-flush
Output polarity		DC
Assured operating distance		0 ... 50 mm
Measuring body		high grade steel tube
Reduction factor r_Al		0.4
Reduction factor r_Cu		0.3
Reduction factor r₃₀₄		0.85
Bottle speed		ca. 2.5 m/s (65000 btls./h)
Output type		4-wire
Adjustment aid		LED, green/red
Nominal ratings
Operating voltage		10 ... 30 V
Switching frequency		0 ... 100 Hz
Hysteresis		typ. 3 %
Reverse polarity protection		reverse polarity protected
Short-circuit protection		pulsing
Voltage drop		≤ 3 V
Operating current		0 ... 200 mA
No-load supply current		≤ 20 mA
Time delay before availability		≤ 20 ms
Operating voltage indicator		LED, green
Switching state indicator		LED, yellow
Compliance with standards and directives
Standard conformity
	Standards	EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012
Approvals and certificates
UL approval		cULus Listed, General Purpose
CSA approval		cCSAus Listed, General Purpose
Ambient conditions
Ambient temperature		0 ... 60 °C (32 ... 140 °F)
Mechanical specifications
Connection type		screw terminals
Information for connection		A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 %
Core cross-section		up to 2.5 mm²
	Minimum core cross-section	without wire end ferrule 0.5 mm² , with connector sleeves 0.34 mm²
	Maximum core cross-section	without wire end ferrule 2.5 mm² , with connector sleeves 1.5 mm²
Housing material		POM
Sensing face		POM
Degree of protection		IP68