NJ15+U1+DW1-100

Артикул: 015950

Inductive speed monitor

16 285 Р

Производитель:

PEPPERL+FUCHS

Производитель: PEPPERL+FUCHS

Краткое описание: технические характеристики NJ15+U1+DW1-100

General specifications
Switching function		Normally open (NO)
Output type		PNP
Frequency range		10 ... 100 Hz , adjustable
Rated operating distance		15 mm
Installation		flush
Output polarity		DC
Assured operating distance		0 ... 12.15 mm
Reduction factor r_Al		0.4
Reduction factor r_Cu		0.3
Reduction factor r₃₀₄		0.85
Nominal ratings
Operating voltage		15 ... 60 V DC
Reverse polarity protection		reverse polarity protected
Short-circuit protection		pulsing
Voltage drop		≤ 2 V
Operating current		0 ... 100 mA
No-load supply current		≤ 25 mA
Switching state indicator		LED 1: yellow
Damping indicator		LED 2: yellow
Functional safety related parameters
MTTF_d		820 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %
Approvals and certificates
UL approval		cULus Listed, General Purpose
CSA approval		cCSAus Listed, General Purpose
CCC approval		Certified by China Compulsory Certification (CCC)
Ambient conditions
Ambient temperature		-25 ... 70 °C (-13 ... 158 °F)
Mechanical specifications
Connection type		screw terminals
Information for connection		A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 %
Core cross-section		up to 2.5 mm²
	Minimum core cross-section	without wire end ferrule 0.5 mm² , with connector sleeves 0.34 mm²
	Maximum core cross-section	without wire end ferrule 2.5 mm² , with connector sleeves 1.5 mm²
Housing material		PBT
Sensing face		PBT
Degree of protection		IP67