NBN40-L2-B3-V1

Артикул: 226320

Inductive sensor

4 816 Р

Производитель:

PEPPERL+FUCHS

Производитель: PEPPERL+FUCHS

Краткое описание: технические характеристики NBN40-L2-B3-V1

General specifications
Switching function		Normally open/closed (NO/NC) programmable
Output type		AS-Interface
Rated operating distance		40 mm
Installation		non-flush
Assured operating distance		0 ... 32.4 mm
Reduction factor r_Al		0.3
Reduction factor r_Cu		0.3
Reduction factor r₃₀₄		0.75
Slave type		Standard slave
AS-Interface specification		V2.1
Required master specification		≥ V2.1
Output type		2-wire
Nominal ratings
Operating voltage		26.5 ... 31.9 V via AS-i bus system
Switching frequency		0 ... 50 Hz
Hysteresis		typ. 5 %
Reverse polarity protection		reverse polarity protected
No-load supply current		≤ 40 mA
Time delay before availability		≤ 1000 ms
Operating voltage indicator		LED, green
Switching state indicator		LED, yellow
Functional safety related parameters
MTTF_d		1330 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %
Compliance with standards and directives
Standard conformity
	Standards	EN 60947-5-2:2007 IEC 60947-5-2:2007
Approvals and certificates
UL approval		cULus Listed, General Purpose
CSA approval		cCSAus Listed, General Purpose
CCC approval		CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature		-25 ... 70 °C (-13 ... 158 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection type		Connector plug M12 x 1 , 4-pin
Housing material		PA
Sensing face		PA
Degree of protection		IP69K