DAD30-RT/35

Артикул: 418450

Optical data coupler

57 071 Р

Производитель:

PEPPERL+FUCHS

Производитель: PEPPERL+FUCHS

Краткое описание: технические характеристики DAD30-RT/35

Описание оборудования
Optical data coupler

General specifications
Effective detection range		0 ... 100 m
Threshold detection range		150 m
Light source		LED
Light type		modulated visible red light
Alignment aid		with function display
Transmission mode		FSK
Response delay		40 µs
Diameter of the light spot		1800 mm at a distance of 100 m
Angle of divergence		Emitter: 1 ° Receiver: 5 °
Ambient light limit		30000 Lux
Indicators/operating means
Function indicator		LED red: switch point LED green: sufficient stability control
Control elements		8-fold DIP-switch for selection of transmission frequency and interface
Electrical specifications
Operating voltage		24 V DC ± 25 %
No-load supply current		200 mA
Data sampling blanking		Input for incoming data blanking with +24 V DC
Data rate		0 ... 19.2 kBit/s
Operation frequency		F1 = 83 kHz F2 = 118 kHz
Interface
Interface type		RS 232, RS 422, CL20 mA active/passive switchable
Output
Pre-fault indication output		2 PNP-outputs, short-circuit protected, 30 V DC 0.1 A activated for single or sufficient stability control
Measurement output		+1.8 ... 5.8 V DC, max. 10 mA, simple stability control: 2.5 V triple stability control: 4.2 V
Conformity
Product standard		EN 60947-5-2
Approvals and certificates
Approvals		CE
Ambient conditions
Ambient temperature		-20 ... 60 °C (-4 ... 140 °F)
Storage temperature		-20 ... 75 °C (-4 ... 167 °F)
Mechanical specifications
Degree of protection		IP65
Connection		25-pin Sub-D connector
Material
	Housing	Aluminum
	Optical face	plastic lens
Mass		500 g