SLCT14-700-T
Артикул: 270808
Safety light curtain
38 396 Р
Производитель:
PEPPERL+FUCHS
Поделиться:
Производитель: PEPPERL+FUCHS
Краткое описание: технические характеристики SLCT14-700-T
| Описание оборудования | ||
|---|---|---|
| Safety light curtain | ||
| General specifications | ||
|---|---|---|
| Effective detection range | 0.2 ... 8 m | |
| Light source | IRED | |
| Light type | modulated infrared light , 850 nm | |
| Protection field height | see Table 1, max. 1200 mm | |
| Operating mode | Startup/restart disable, deactivateable | |
| Optical resolution | 14 mm | |
| Angle of divergence | 5 ° | |
| Ambient light limit | Not sensitive to ambient light in accordance with IEC 61496-2 | |
| UL File Number | E215245 | |
| Functional safety related parameters | ||
| Safety Integrity Level (SIL) | SIL 1 | |
| Performance level (PL) | PL c | |
| Category | Cat. 2 | |
| Mission Time (TM) | 20 a | |
| PFHd | Depending on the protection field height; see Manual | |
| Type | 2 | |
| Indicators/operating means | ||
| Operation indicator | green: Power on | |
| Function indicator | Green: OSSD ON , Red: OSSD OFF | |
| Status indicator | Transmitter unit: LED yellow: Mode, test or error Receiver: LED yellow: Start readiness, function reserve or error |
|
| Electrical specifications | ||
| Operating voltage | 24 V DC (-20%, +30%) ; Power supply with safe isolation: 24 V DC | |
| No-load supply current | Transmitter unit:≤ 150 mA Receiver: ≤ 150 mA (outputs open) |
|
| Protection class | III , IEC 61140 | |
| Power consumption | Transmitter unit: 5 W Receiver: 15 W |
|
| Input 1 | ||
| Input type | Transmitter unit test | |
| Input format | Break contact | |
| Switching voltage | 24 V DC | |
| Input current | 5 mA | |
| Input 2 | ||
| Input type | Transmitter unit, mode A/B | |
| Function | Beam Code A: open or 0 V Beam Code B: 24 V DC, 5 mA |
|
| Input 3 | ||
| Input type | Receiver unit relay monitor | |
| Input format | Break contact | |
| Switching voltage | 24 V DC | |
| Input current | 5 mA | |
| Input 4 | ||
| Input type | Receiver unit, start release | |
| Input format | Break contact | |
| Input current | 5 mA | |
| Input 5 | ||
| Input type | Receiver unit, mode A/B (see transmitter unit, mode A/B) | |
| Output | ||
| Response time | see Table 1, max. 54 ms | |
| Output 1 | ||
| Output type | Receiver unit OSSD | |
| Signal output | PNP semiconductor , monitored for short and cross circuits | |
| Switching voltage | ON: UB - 2 V; OFF: < 1 V | |
| Switching current | ON: max. 0.1 A; OFF: < 5 µA | |
| Output 2 | ||
| Output type | Receiver signal output start readiness | |
| Signal output | PNP-semiconductor, short-circuit protected, 0.1A | |
| Conformity | ||
| Functional safety | ISO 13849-1 ; EN 61508 part1-4 | |
| Product standard | EN 61496-1 ; IEC 61496-2 | |
| Approvals and certificates | ||
| CE conformity | CE | |
| UL approval | cULus Listed | |
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| TÜV approval | TÜV | |
| Ambient conditions | ||
| Ambient temperature | -35 ... 60 °C (-31 ... 140 °F) | |
| Storage temperature | -35 ... 70 °C (-31 ... 158 °F) | |
| Relative humidity | max. 95 %, not condensing | |
| Mechanical specifications | ||
| Housing length L | see table 2 | |
| Degree of protection | IP67 , For indoor use only | |
| Connection | Transmitter unit: 4-pin, M12 x 1 connector Receiver: 8-pin, M12 x 1 connector Cable cross section min. 0.25 mm2 Max. cable length 50 m |
|
| Material | ||
| Housing | extruded aluminum section , Silver anodized | |
| Optical face | Plastic pane , Transparent polycarbonate | |
| Mass | see table 2 | |
| General information | ||
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
Оформить заказ на SLCT14-700-T вы можете в компании compeq-pepperl отправив заявку по почте, а также по телефону или в офисе компании.
Вам может понравиться
