SLCS30-1000-R

Артикул: 270805

Safety light curtain

73 288 Р

Заказать

Производитель:

PEPPERL+FUCHS

Получить консультацию

Производитель: PEPPERL+FUCHS

Технические данные PDF

Краткое описание: технические характеристики SLCS30-1000-R

Описание оборудования
Safety light curtain

General specifications
Effective detection range		0.4 ... 8 m
Light source		IRED
Light type		modulated infrared light , 850 nm
Protection field height		see Table 1, max. 2400 mm
Operating mode		Startup/restart disable, deactivateable
Optical resolution		30 mm
Angle of divergence		< 5 °
Ambient light limit		Not sensitive to ambient light in accordance with IEC 61496-2
UL File Number		E215245
Functional safety related parameters
Safety Integrity Level (SIL)		SIL 3
Performance level (PL)		PL e
Category		Cat. 4
Mission Time (T_M)		20 a
PFH_d		Depending on the protection field height; see Manual
Type		4
Indicators/operating means
Operation indicator		green: Power on
Function indicator		Green: OSSD ON , Red: OSSD OFF
Status indicator		Transmitter unit: LED yellow: Mode, test or error Receiver: LED yellow: Start readiness, function reserve or error
Electrical specifications
Operating voltage		24 V DC (-20%, +30%) ; Power supply with safe isolation: 24 V DC
No-load supply current		Transmitter unit:≤ 150 mA Receiver: ≤ 150 mA (without outputs)
Protection class		III , IEC 61140
Power consumption		Transmitter unit: 5 W Receiver: 15 W
Input 1
Input type		Transmitter unit test
Input format		Break contact
Switching voltage		24 V DC
Input current		5 mA
Input 2
Input type		Transmitter unit, mode A/B
Function		Beam Code A: open or 0 V Beam Code B: 24 V DC, 5 mA
Input 3
Input type		Receiver unit relay monitor
Input format		Break contact
Switching voltage		24 V DC
Input current		5 mA
Input 4
Input type		Receiver unit, start release
Input format		Break contact
Input current		5 mA
Input 5
Input type		Receiver unit, mode A/B (see transmitter unit, mode A/B)
Output
Response time		see Table 1, max. 38 ms
Output 1
Output type		Receiver unit OSSD
Signal output		PNP semiconductor , monitored for short and cross circuits
Switching voltage		ON: U_B - 2 V; OFF: < 1 V
Switching current		ON: max. 0.1 A; OFF: < 5 µA
Output 2
Output type		Receiver signal output start readiness
Signal output		PNP-semiconductor, short-circuit protected, 0.1A
Conformity
Functional safety		ISO 13849-1 ; EN 61508 part1-4
Product standard		EN 61496-1 ; IEC 61496-2
Approvals and certificates
CE conformity		CE
UL approval		cULus Listed
CCC approval		CCC approval / marking not required for products rated ≤36 V
TÜV approval		TÜV
Ambient conditions
Ambient temperature		-35 ... 60 °C (-31 ... 140 °F)
Storage temperature		-35 ... 70 °C (-31 ... 158 °F)
Relative humidity		max. 95 %, not condensing
Mechanical specifications
Housing length L		see table 2
Degree of protection		IP67 , For indoor use only
Connection		Transmitter unit: 4-pin, M12 x 1 connector Receiver: 8-pin, M12 x 1 connector Cable cross section min. 0.25 mm² Max. cable length 50 m
Material
	Housing	extruded aluminum section , gold anodized
	Optical face	Plastic pane , Transparent polycarbonate
Mass		see table 2
General information
Supplementary information		EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.