VSE18-M-LAS/40a/118/128
Артикул: 800201
Thru-beam sensor
16 778 Р
Производитель:
PEPPERL+FUCHS
Поделиться:
Производитель: PEPPERL+FUCHS
Краткое описание: технические характеристики VSE18-M-LAS/40a/118/128
| Описание оборудования | ||
|---|---|---|
| Thru-beam sensor, M18 threaded housing design, nickel-coated brass housing, 60 m detection range, laser light, sensitivity adjuster, light/dark on, DC version, push-pull output, M12 plug | ||
| System components | ||
|---|---|---|
| Emitter | VS18-M-LAS/76a/118 | |
| Receiver | VSE18-M-LAS/40a/118/128 | |
| General specifications | ||
| Effective detection range | 0 ... 60 m | |
| Threshold detection range | 85 m | |
| Light source | laser diode | |
| Light type | modulated visible red light | |
| Laser nominal ratings | ||
| Note | LASER LIGHT , DO NOT STARE INTO BEAM | |
| Laser class | 1 | |
| Wave length | 655 nm | |
| Beam divergence | 11.7 mrad | |
| Pulse length | 2 µs | |
| Repetition rate | 50 kHz | |
| max. pulse energy | 2.55 nJ | |
| Diameter of the light spot | 100 mm x 100 mm at a distance of 85 m | |
| Angle of divergence | adjustable focal point | |
| Optical face | frontal | |
| Ambient light limit | 30000 Lux | |
| Hysteresis | < 15 % | |
| Functional safety related parameters | ||
| MTTFd | 520 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 90 % | |
| Indicators/operating means | ||
| Operation indicator | LED green, flashes in case of short-circuit | |
| Function indicator | LED yellow, light with free light beam , flashes when falling short of the stability control , OFF when light beam is interrupted (in receiver) | |
| Control elements | Sensitivity adjuster, light/dark switch (receiver) | |
| Electrical specifications | ||
| Operating voltage | 10 ... 30 V DC , class 2 | |
| No-load supply current | Emitter: 20 mA , Receiver: 15 mA | |
| Protection class | II , rated voltage ≤ 50 V AC with pollution degree 1-2 according to IEC 60664-1 | |
| Input | ||
| Test input | emitter deactivation at +UB | |
| Output | ||
| Switching type | light/dark on, switchable | |
| Signal output | Push-pull (4 in 1) output short-circuit protected overvoltage protected | |
| Switching voltage | 30 V DC | |
| Switching current | max. 200 mA | |
| Voltage drop | ≤ 2.5 V DC | |
| Switching frequency | 5000 Hz | |
| Response time | 100 µs | |
| Conformity | ||
| Product standard | EN 60947-5-2 | |
| Compliance with standards and directives | ||
| Standard conformity | ||
| Laser class | IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007 | |
| Approvals and certificates | ||
| UL approval | cULus Listed, Type 1 enclosure | |
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 55 °C (-13 ... 131 °F) | |
| Storage temperature | -30 ... 70 °C (-22 ... 158 °F) | |
| Shock resistance | b < 30 g, T < 11 ms | |
| Mechanical specifications | ||
| Degree of protection | IP67 | |
| Connection | 4-pin, M12 x 1 connector | |
| Material | ||
| Housing | brass, nickel-plated | |
| Optical face | plastic | |
| Mass | 60 g (device) | |
Оформить заказ на VSE18-M-LAS/40a/118/128 вы можете в компании compeq-pepperl отправив заявку по почте, а также по телефону или в офисе компании.
Вам может понравиться
