M12-F4-IR/76b/124
Артикул: 205054
Thru-beam sensor
5 412 Р
Производитель:
PEPPERL+FUCHS
Поделиться:
Производитель: PEPPERL+FUCHS
Краткое описание: технические характеристики M12-F4-IR/76b/124
| Описание оборудования | ||
|---|---|---|
| Robust thru-beam sensor for standard applications, small design, 25 m detection range, infrared light, emission frequency F4, light/dark on, push-pull output, weak signal output, test input, external Teach-In, M12 plug | ||
| System components | ||
|---|---|---|
| Emitter | M12-F4-IR/76b/124 | |
| Receiver | MV12-F4/82b/124/128 | |
| General specifications | ||
| Effective detection range | 0 ... 16 m | |
| Threshold detection range | 25 m | |
| Light source | 2 LED | |
| Light type | modulated infrared light , 880 nm | |
| Target size | min. 12 mm | |
| Alignment aid | LED red in receiver | |
| Diameter of the light spot | approx. 420 mm at a distance of 16 m | |
| Angle of divergence | 1.5 ° | |
| Ambient light limit | ||
| Continuous light | 40000 Lux | |
| Modulated light | 5000 Lux | |
| Functional safety related parameters | ||
| MTTFd | 570 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 90 % | |
| Indicators/operating means | ||
| Operation indicator | LED green, flashes in case of short-circuit | |
| Function indicator | 2 LEDs yellow for switching state, stability control, TEACH-IN and contrast detection mode | |
| Control elements | rotary switch for light/dark, 5-step switch for contrast recognition adjustment | |
| Contrast detection levels | 15 % - clear glass bottles 25 % - plastic foils 40 % - colored glass or opaque materials adjustable by Teach-In key or external wire |
|
| Electrical specifications | ||
| Operating voltage | 10 ... 30 V DC | |
| Ripple | max. 10 % | |
| No-load supply current | Emitter: ≤ 35 mA Receiver: ≤ 45 mA |
|
| Input | ||
| Test input | emitter deactivation at 0 V | |
| Function input | Ext. Teach-In input (ET) | |
| Output | ||
| Pre-fault indication output | 1 PNP, inactive when level falls below function reserve after approx. 5 s. Immediately inactive if the beam is interrupted 4 times during the flashtime. |
|
| Switching type | light/dark on, switchable | |
| Signal output | 1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected | |
| Switching voltage | max. 30 V DC | |
| Switching current | max. 0.2 A | |
| Voltage drop | ≤ 2.5 V DC | |
| Switching frequency | 500 Hz | |
| Response time | 1 ms | |
| Conformity | ||
| Product standard | EN 60947-5-2 | |
| Compliance with standards and directives | ||
| Standard conformity | ||
| Shock and impact resistance | IEC / EN 60068. half-sine, 40 g in each X, Y and Z directions | |
| Vibration resistance | IEC / EN 60068-2-6. Sinus. 10 -150 Hz, 5 g in each X, Y and Z directions | |
| Approvals and certificates | ||
| Protection class | II, rated voltage ≤ 300 V AC with pollution degree 1-2 according to IEC 60664-1 | |
| UL approval | cULus | |
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 60 °C (-40 ... 140 °F) | |
| Storage temperature | -40 ... 75 °C (-40 ... 167 °F) | |
| Mechanical specifications | ||
| Housing width | 41.5 mm | |
| Housing height | 49 mm | |
| Housing depth | 15 mm | |
| Degree of protection | IP67 | |
| Connection | Metal connector, M12, 5-pin, 90° rotatable | |
| Material | ||
| Housing | Frame: nickel plated, die cast zinc, Laterals: glass-fiber reinforced plastic PC |
|
| Optical face | Plastic pane | |
| Mass | 120 g (emitter and receiver) | |
Оформить заказ на M12-F4-IR/76b/124 вы можете в компании compeq-pepperl отправив заявку по почте, а также по телефону или в офисе компании.
Вам может понравиться
