General specifications
Detection type		photoelectric sampling
Pulse count		max. 2500
Functional safety related parameters
MTTF_d		140 a
Mission Time (T_M)		20 a
L₁₀		50 E+9 at 1750 rpm
Diagnostic Coverage (DC)		0 %
Electrical specifications
Operating voltage		10 ... 30 V DC or 5 V DC ± 5 % (see "Output circuit" in the ordering information)
No-load supply current		max. 70 mA
Output
Output type		push-pull, incremental or RS 422, incremental (see "Output circuit" in the ordering information)
Voltage drop		< 2.5 V (push-pull, incremental)
Load current		max. per channel 40 mA , short-circuit protected, reverse polarity protected (push-pull, incremental) max. per channel 20 mA , short-circuit protected, reverse polarity protected (RS 422, incremental)
Output frequency		max. 200 kHz
Rise time		600 ns
De-energized delay		600 ns
Connection
Connector		M23 connector, 12-pin , clockwise rotation M23 connector, 12-pin , counter clockwise rotation
Cable		∅7,5 mm, 6 x 2 x 0,14 mm²
Terminal compartment		Cable duct for cable diameter ∅4 mm ... 13 mm
Standard conformity
Degree of protection		DIN EN 60529, IP66, IP67 or IP69K
Climatic testing		DIN EN 60068-2-78 , no moisture condensation
Emitted interference		EN 61000-6-4:2007/A1:2011
Noise immunity		EN 61000-6-2:2005
Shock resistance		DIN EN 60068-2-27, 200 g, 6 ms
Vibration resistance		DIN EN 60068-2-6, 20 g, 10 ... 2000 Hz
Ambient conditions
Operating temperature		-40 ... 80 °C (-40 ... 176 °F) fixed cable
Storage temperature		-40 ... 80 °C (-40 ... 176 °F)
Mechanical specifications
Material
	Housing	3.2315 aluminum
	Flange	3.2315 aluminum
	Shaft	Stainless steel 1.4305 / AISI 303
Mass		approx. 2200 g
Rotational speed		max. 3000 min ^-1
Starting torque		≤ 20 Ncm
Shaft insulation		max. 2.5 kV (for dielectric strength version)
Shaft load
	Axial	≤ 300 N
	Radial	≤ 400 N
	Angle offset	1 °
	Axial offset	max. 1 mm

ENI11HD-H16NAE-2048PP5-TC5

Краткое описание: технические характеристики ENI11HD-H16NAE-2048PP5-TC5