General specifications
Detection type		photoelectric sampling
Pulse count		max. 5000
Functional safety related parameters
MTTF_d		140 a
Mission Time (T_M)		20 a
L₁₀		70 E+9 at 6000 rpm
Diagnostic Coverage (DC)		0 %
Electrical specifications
Operating voltage		10 ... 30 V DC
No-load supply current		max. 50 mA
Output
Output type		RS 422, incremental
Load current		max. per channel 20 mA , conditionally short-circuit proof (not with U_b), reverse polarity protected
Output frequency		max. 100 kHz
Rise time		100 ns
De-energized delay		100 ns
Connection
Connector		type 9415 (1-20 UNEF), 7-pin type 9419 (1 1/8-18 UNEF), 10-pin
Cable		∅7.8 mm, 6 x 2 x 0.14 mm², 2 m or 5 m
Standard conformity
Degree of protection		DIN EN 60529, IP54 (without shaft seal)/IP65 (with shaft seal)
Climatic testing		DIN EN 60068-2-3, no moisture condensation
Emitted interference		EN 61000-6-4:2007/A1:2011
Noise immunity		DIN EN 61000-6-2
Shock resistance		DIN EN 60068-2-27, 100 g, 3 ms
Vibration resistance		DIN EN 60068-2-6, 10 g, 10 ... 2000 Hz
Approvals and certificates
UL approval		cULus Listed, General Purpose, Class 2 Power Source
Ambient conditions
Operating temperature
	Glass disk	-20 ... 80 °C (-4 ... 176 °F)
	Plastic disk	-20 ... 60 °C (-4 ... 140 °F)
Storage temperature
	Glass disk	-40 ... 100 °C (-40 ... 212 °F)
	Plastic disk	-40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Material
	Housing	diecast zinc, not laquered or coated
	Flange	3.1645 aluminum
	Shaft	Stainless steel 1.4305 / AISI 303
Mass		approx. 397 g
Rotational speed		max. 12000 min ^-1
Moment of inertia		≤ 25 gcm²
Starting torque		≤ 1.5 Ncm (with shaft seal) ≤ 1 Ncm (without shaft seal)
Shaft load
	Axial	40 N at max. 6000 min^-1 10 N at max. 12000 min^-1
	Radial	60 N at max. 6000 min^-1 20 N at max. 12000 min^-1

RVI25P-06DASR6XN-01200

Краткое описание: технические характеристики RVI25P-06DASR6XN-01200